MANPLOW Stretch Wrap Dispensers

Never Bend Over!       Never Over Reach!      Never Walk Backwards!  

The MANPLOW Stretch Wrap Dispenser is a pole design alternative to apply stretch wrap. Lighter, quicker, and less physically demanding to use than a parallel handle dispenser.  MANPLOW dispensers allow the user to apply wrap in a natural, upright manner, reducing fatigue and injuries. When choosing which model is right for you, consider this, the longer the handle, the less fatigue. Diminishing fatigue reduces injuries, improves performance, increases output, and can even boost morale.

The StandUp Base-

All models feature the StandUp Base that allows your MANPLOW to be set down on any flat surface and remain up right. The StandUp Base also offers a lower profile so it can wrap less than an inch from the floor, securing your freight more securely to the pallet. 

The Tension System-

MANPLOW Stretch Wrap Dispensers utilize the combination of hole sets and compression to achieve the desired tension. The more compression, the more tension. Our tension system will not loosen with use as with threaded tension systems. Once you set it, the tension stays consistent. 

You get a consistent wrap every time.  

Our handles are designed to maximize hand separation. The tension system is located toward the middle of the handle so you can place your hand further down where most of the weight is. This allows you to spread your hands wider to create more leverage. 

More leverage means less effort and less fatigue. Wrap better longer!

The Extra Long Handle provides a maximum hand separation of 45". Ideal for taller users.

• HIGH Volume (10+ Pallets/Shift)- Users up to 6' 11"*
• Medium Volume (5-10 Pallets/Shift)- Users up to 6' 11"*
• Low Volume (1-4 Pallets/Shift)- Users up to 6' 11"*

                                                                                  *We couldn't fine any 7 footers to sample

    Weight without material- 2 pounds

    Total length with 18 inch roll- 63 inches

    Designed for 12” – 18” roles with 3” or 2.5" core material.

    Made in America 

The Long Handle provides a maximum hand separation of 34". Ideal for average users.

• HIGH Volume (10+ Pallets/Shift)- Users up to 5' 9"
• Medium Volume (5-10 Pallets/Shift)- Users up to 6'
• Low Volume (1-4 Pallets/Shift)- Users up to 6' 3"

    Weight without material- 2 pounds

    Total length with 18 inch roll- 54 inches

    Designed for 12” – 18” roles with 3” or 2.5" core material.

    Made in America 

 The Short Handle provides a maximum hand separation of 25". Ideal for shorter users.

• HIGH Volume (10+ Pallets/Shift)- Users up to 5' 2"
• Medium Volume (5-10 Pallets/Shift)- Users up to 5' 6"
• Low Volume (1-4 Pallets/Shift)- Users up to 5' 10"

    Weight without material- 2 pounds

    Total length with 18 inch roll- 45 inches

    Designed for 12” – 18” roles with 3” or 2.5" core material.

    Made in America 

Pre-stretch wrap doesn't require as much tension as cast material.  Simply adjust your MANPLOW to a lower tension setting and wrap away!

Even the best workers are more apt to take short cuts when fatigued.  When it comes to preparing shipments and material handling  THE RIGHT HANDLE MAKES A DIFFERENCE!

The handle length doesn’t dictate how tall a pallet you can wrap.  

The SWD4500, SWD3400 and SWD2500 ARE ALL MORE THAN CAPABLE OF WRAPPING A 92” PALLET!

Handle length determines how far you can separate your hands when using the equipment. 

The wider you space your hands the more leverage you can generate. 

More leverage means less effort and less fatigue. 

Less effort and less fatigue allow you to perform at a higher level for a longer time.

WRAP BETTER, LONGER!

MANPLOWs are designed to be used in an upright, walking position. If a taller associate uses a handle that is too short, they will have to bend down while wrapping the bottom of the pallet. They will experience fatigue sooner.  A proper length handle will allow them to wrap the bottom of the pallet without discomfort and fatigue. 

FOR BEST PERFORMANCE, CHOOSE THE HANDLE BASED ON VOLUME AND ASSOCIATE HEIGHT!

MANPLOW has redesigned our StandUp Base to accommodate “Short Cores” and restore your performance expectations.   

The redesigned StandUp Base will: 

• Replace our existing StandUp Base.
• Be included in all new equipment orders, starting 4/17/2023.
• Will be backwards compatible with your existing equipment.
• Be available for replacement part orders to immediately upgrade existing equipment, starting 4/17/2023.
• Maintain the same product number for ease of ordering.

 Without compressing the spring, rotate the handle until you see a portion of a stem hole through one of the lower handle holes. Rotate the handle 2 holes, compress the spring, and insert the Tension Control Pin. If you like more tension, try rotating the Handle 3 Holes. 

No, the MANPLOW Stretch Wrap Dispenser is not a specialty tool. It can easily wrap, with less effort, anything a hand held dispenser can. You will not need a regular hand wrap dispenser. In fact, the regular dispenser is more of a specialty tool then the MANPLOW. Regular dispensers are very good at wrapping items waist to chest high. They require too much effort in awkward positions to do a good job wrapping lower than your waist or higher than your chest.

No. Assembly and roll changes can all be done without any tools. It is a very simple process that takes about 30 seconds to do.  

None. A MANPLOW can do everything a regular dispenser can do and so much more. It can do a better job and it is safer to use. If you have a MANPLOW Stretch Wrap Dispenser, you will not need any other dispensers.  

Anyone can assemble and use a MANPLOW Stretch Wrap Dispenser. Follow the simple directions to assemble it for the first time and you’ll understand just how simple, simple can be. Using it is very intuitive. If you can walk around a pallet, you can wrap it. Sure there are fancy wrapping techniques that you can do with a MANPLOW that you could never do with a regular dispenser, but they are easy and often times fun to experiment with.  

MANPLOW Stretch Wrap Dispensers are ruggedly simple. They are over-built with super strong, lightweight aluminum to stand up to heavy use and by design, have no vulnerable systems that can render it unusable. That’s not to say it will never get run over by a forklift. And if it does, rest assured, we can replace any part in no time flat.  

The very act of wrapping a pallet with a parallel handle dispenser is nearly identical to the party game where folks run up to a baseball bat, bend over , spin around 10 times and then have to run to the next activity. It’s funny to watch when it is in the middle of a soft, grassy field but not when it’s in a fast paced warehouse with lots of hard surfaces, sharp edges and moving equipment. Many warehouse injuries result from slip and falls. If you can eliminate situations where you may slip and fall, you can eliminate injuries. Additionally, some pallets may need to be wrapped in an over/under method. This exposes workers arms with a parallel handle dispenser. Not with a MANPLOW. You can do a 360 wrap without ever exposing any part of your body to potential harm.   

MANPLOW offers a 30-Day, Money Back Guarantee. Contact us at theman@manplow.com, put all of the parts back in the original carton, send it back to us and we will refund your purchase price 

We also have a 12 Month Warranty. Manufacturer’s Warranty on defects in material and workmanship. Warranty does not cover normal wear and tear. Warranty provides for replacement only. For all warranty issues, contact MANPLOW directly at theman@manplow.com and we will make it right!